Eco Friendly Cloth Dyeing Finishing Machine Liquid Flow and Gas Liquid Mixing
 
 
Three with dyeing machine features
This machine can be 1 : 2.5 ~ 1 : 4 low bath ratio to achieve environmental protection energy conservation and emissions reduction condition dyeing process and shorten the cycle of cloth is invalid, achieve ultra-low tension , short process ( due to the in cylinder head , cloth all run in the main cylinder body inner loop , than traditional dyeing machine cycle , than traditional dyeing machine cycle shorten by about 40%, at the same time , fabric and dyeing dyeing efficiency increased by 40% ) .
On the shrinkage force bigger cloth can be used in a flow dyeing , can avoid cloth crepe , edge , increase power and strengthen the style characteristic of cloth .
 
Good uniform dyeing

• Fabric in slippery teflon rods slot operate smoothly , no wound
• Fabric supported by air , reduce operation tension
• Teflon nozzle design , fog dyeing liquid evenly sprayed on the surface of the fabric to get the best dyeing effect

No crease

• Fabrics can be run under high speed , shorten the cycle time of dyeing
• Strong airflow mixing dye solution permeate fabric , making the rate of sensitive fabric dyeing reduce to a minimum

High temperature emissions

• High temperature direct emissions and heat recovery system
• When the water temperature is 130 ,it can spray type water to wash
• Unique spray type water system can save more water and shorten the washing time , save energy and cost than that of conventional immersion bath washing 

To save energy and cost

• Ultra low bath ratio can save a lot of dyes , auxiliaries , water and other energy , reduce operating costs.
• The newly designed nozzle system can save a lot of energy and ensure that the fabric run smoothly .

 
wide range of application

• dyeing knitted , woven cloth
• Dyeing cloth of open width , cylinder
• The biggest amount of dyeing is 700g

Low and constant bath ratio

• Bath ratio can be as low as 1 : 2 and 1 : 4

 
Calculation of The Liquor Ratio

 

 
Specifications

 
&n